Fritz!Box 7530 - Wall mount - Wall mount
Print Profile(2)
Bill of Materials
Description
-----------------------------------------------------------------------------------------------------------------------------------
This is a wall mount for the Fritz!Box 7530.
It was frustrating not to find a solid wall mount in this orientation.
This one should also be:
- stable
- secure mounting
- childproof (playing children)
- some distance from the wall (cable routing + heat development)
...
What can I say? The search is over 😉 .
Only 4 screws + possibly 4 dowels are required, depending on the surface on which the Fritz!Box is to be installed.
Installation:
- Hold the mount with the box against the wall and mark.
- Drill holes (I assume no liability for any damages)
- Now loosely screw on 1 mount with 2 screws and the other first with one screw
- Now the box can be inserted and the 2nd mount can be folded in
- Insert the 4th screw and tighten everything evenly
- Done^^
As seen in the photos, I deliberately avoided using countersunk screws to avoid “bursting” the layers.
The orientation of the respective profiles is deliberately chosen to keep the Z-seam as invisible as possible. 😉
According to other models on MakerWorld, this diameter is also suitable for the following model numbers:
👉 7530
👉 7530 AX
👉 7230
👉 5530 Fiber - possibly adjust by scaling
Have fun printing🧨
Boost Me (for free)
If you like my work, I appreciate every like, bookmark, and of course, every boost✌
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)