Modular Christmas Tree - Fully 3D Printable!

🌲 Modular Christmas Tree Lamp – Print & Build Guide

Create your own glowing holiday decoration with this fully modular Christmas Tree Lamp system!
Mix and match 4 different tree designs, 6 base styles, and your choice of Bambu Lab LED Kit or Bambu Lab RGB Puck Light to build the perfect festive centerpiece.

🎄 What You Need to Print

1. Choose ONE Tree

• Printed in vase mode
• Thin, elegant, and fast to print
• Available in four unique wave-inspired designs

2. Choose ONE Base

• Printed in standard mode
• Six designs to match your style
• Houses the light and supports the tree

3. Choose ONE Light Insert

Pick the insert depending on your lighting setup:

• Bambu Lab LED Kit Insert
• Bambu Lab RGB Puck Light Insert

Optional: Colored Diffuser

• Only needed when using the Bambu Lab LED Kit
• Adds smooth, soft lighting

4. Print 5 Connector Clips

• Universal for all bases
• Used to firmly attach the tree to the base

🔧 Assembly Instructions

1. Insert the clips into the base
   Each base has 5 internal slots. Simply push the connector clips in until they sit firmly.
2. Place your light into the selected insert
   • For the LED strip: slide it into the diffuser/insert.
   • For the puck light: drop it into the puck insert.
3. Attach the tree to the base
   • Position the tree over the base
   • Reach through the bottom opening of the base to press the tree down onto the clips from inside
   • The clips will snap into place and hold the vase-mode tree securely
4. Screw in the light insert
   Twist the insert into the base until it locks.
5. Route the cable
   Use the cable slot at the bottom of the base for clean cable management.

Your modular Christmas tree lamp is now ready to shine!