Search models, users, collections, and posts
Batman and Robin 1966 Lightbox
IP Report
This model is created by Lightbox Maker
Make Your Model
Print Profile(1)
0.2mm layer, 2 walls, 20% infill
Designer
8.6 h
2 plates
Open in Bambu Studio
Boost
10
33
0
0
10
2
Released
Description
Intro Pow! Bif! Bam! Sok! Blap! animated sequence from the 1966 Batman TV Series, as a lightbox!
Uses 10 colours. Can be used on an AMS-lite if the colours are swapped manually in this sequence:
1) Start with the following:
- Slot 1: Skin
- Slot 2: Grey
- Slot 3: Yellow
- Slot 4: Dark Green
2) As the printer cycles through the colours, begin swapping out colours in this sequence:
- Slot 2: Change Grey to Dark Blue
- Slot 3: Change Yellow to Red
- Slot 4: Change Dark Green to Light Green
- Slot 1: Change Skin to White
- Slot 2: Change Dark Blue to Orange
- Slot 3: Change Red to Black
3) While Black is printing, change ALL THREE of the following slots:
- Slot 2: Change Orange to Grey
- Slot 1: Change White to Skin
- Slot 4: Change Light Green to Dark Green
4) The printer moves to the next layer and starts the sequence over. While Grey is printing:
- Slot 3: Change Black to Yellow.
The AMS-lite will require the switching of these colours in this sequence for the first four layers. The fifth layer onwards will just be black (slot 3).
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)