B&M Cobra Roll roller coaster model
Print Profile(1)
Description
This is a realistic model of a roller coaster cobra roll designed by B&M (Bolliger and Mabillard). It's inspired by Hulk at Islands of Adventure. I recommend printing it with basic PLA, but you can try other filaments at your own risk. The model is 2 plates and takes about 27 hours to print it in full color. Be careful when removing the supports, I recommend cutting them with some small pliers before you try taking them off. To assemble, build from the ground up and the chart that I made labels where all of the pieces should go. The track pieces are numbered in the middle and the supports are numbered on the bottom. Super glue is recommended. Enjoy! (and let me know if there's anything wrong with the print)
Note: Some supports for 4a and 4b have an “f" on the bottom. That stands for flange (the grey circle).
Building difficulty: 8/10
Dimensions: (Length - 11.8 inches) x (Width - 13.4 inches) x (Height - 11.5 inches)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (56)