Grinch HumBug

Grinch Christmas décor Hueforge

with loop to hang

if you adjust the size make sure you keep the hight the same

or will not print correctly 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 162.56x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

    #000000 PLA Jayo black  Transmission Distance: 1.7
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #a6a9aa PLA Jayo silver  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Jayo black
    At layer #9 (0.8mm) swap to BambuLab Basic Blue Gray
    At layer #14 (1.2mm) swap to Jayo silver
    At layer #18 (1.52mm) swap to BambuLab Basic Jade White for the rest.