Powerbank Case for IP5306 USB-C Module - 1S 18650

I needed a power bank case for my salvaged 18650 batteries.

The module I used is in the link below.

5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,

https://www.aliexpress.com/item/1005006982908321.html

Choose the "welding" version for the USB A connector-soldered module.

Since I used salvaged 18650 batteries with spot-welded headers, I could solder the cables directly to the headers.

The module works best with a battery capacity of around 2000mAh.

Probably needs a how-to tutorial, but since I am lazy, I just added a simple guide and called it a day.

Model tolerances are pretty tight, and the model requires a perfect first-layer print.

Choose the seam position with the “back” setting.

You can try the hide seams or scarf joint seam settings, but these settings alter the surface quality, in my opinion.

No need for supports or brims.

The model perfectly works for me; I am just sharing for feedback.