Universal 3D Print Release Card & Spatula

Tired of wrestling with your prints?

We've all been there. You flex the build plate, you try to pry it off, and that print just won't let go. You end up worrying about snapping your print, scratching your bed, or bending that build plate a little too far.

I designed this simple tool to solve that exact problem. Think of it as a dedicated "print release card" that slides right under your print to pop it off with ease.

Here's how it works:

It's super simple. Take the card and slide the thin edge between the bottom of your print and the build plate. Gently push it in a little further. You'll feel it start to separate the print from the bed. A quick little twist or push is usually all it takes to hear that satisfying "pop" as your print releases!

No more prying, no more brute force. Just a clean and easy release every time.

Why you'll love it:

It's super safe and designed to be gentle, so it won't scratch up your nice PEI sheet or other build surfaces. It protects your prints by releasing them evenly, avoiding stress points that can cause cracks. It's actually easy to use—if you can slide a card, you can use this. It works with any FDM printer or bed type, and the best tools are the ones you can make yourself!

Printing it is a breeze.

No supports are needed. Just print it flat on the bed. A standard 0.2mm layer height works great. Use about 20-30% infill for a good mix of strength and a little flex. PLA is perfect, but PETG will make it a bit more durable if you want.

Hope this little tool makes your printing life a bit easier! Happy printing!