【Super Smooth】8-in-1 manual feeder, no hardware needed, compatible with AMS and external spools
Print Profile(3)
![[No Stand] 0.2mm layer height, 2 walls, 20% infill](https://makerworld.bblmw.com/makerworld/model/US36dc25cdde7/474626824/instance/2025-11-13_b053d7289c50a.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Supports 1-8 tubes for filament feeding, no pneumatic connectors needed, gently twist arrow to arrow and it will pass through smoothly. No hardware needed, PLA is recommended for printing. I've printed with PETG and PLA, and PLA clearly prints better. If there's anything to improve, please leave a comment. I've tested it and the filament goes through easily, if not, just trim the material
Two versions have been uploaded, single plate printing takes about 1 hour and consumes 18g of material
The dimensions are the same, one plate comes with a bracket, and one plate is without a bracket, choose freely. Feedback pictures are welcome
Some users reported that the holes are too small to insert the filament, but it's already 4.2mm. Please first check if your filament was printed with correct dimensions. My official PLA and third-party PETG prints had no problems
Friends with boost coupons, please help me with a boost
Boost Me (for free)
Never fail, never spaghetti haha
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)