Parking Vertical Modulable - LÉGO Speed Champions

• This parking / vertical support was designed to accommodate various **LEGO SPEED CHAMPIONS** vehicles on different platform heights
  Individual and modular
  The model comes with various parts to suit each type of vehicle
  (F1 - Hypercar - Supercar - Muscle car - SUV - 4x4 - Creator - Technic) and many more

👇 **More details below** 👇
 

• Print in **PLA Tough+** 

  - Offering better strength, heat resistance, and less brittle than **Classic PLA**

  - This model requires no supports

  - This model requires no strong glue or screws

   

• Important points, Tips and tricks.
  - Each part was printed on an A1 mini with a **3D effect plate - Carbon Fiber**,
  to give a neat appearance to the underside of each platform, for example if the vertical parking is positioned
  high on a shelf
   

• - Each part has been renamed as well as the print plates to categorize the parts
  For better understanding, I have also added various colors to better guide the user on the functionalities of the various parts
  
  ⚠️The print profile is based on an A1 mini and a 3D effect plate. Remember to redefine your printer and your plate
  
  ⚠️The parts have been colorized to better guide the user, please redefine the filament and a single color for all parts

   

             

   

👇read carefully

• List of 3D Printed parts per plate in the Kit + Recommendations for one shelf :
  
  Plate - 1
  x1 : Bottom plate (Type: car), height - 8.3cm
  Printing required 1 time
  ⚠️If you start with a car type model, printing plate 5 is not necessary.
  
  Plate - 2
  x1 - x∞ : Middle plate (Type: car), height - 8.3cm
  Printing required 0 to 99 times

  
  Plate - 3
  x1 : Top plate, platforms - Car and SUV

  Printing required 1 time
  
  Plate - 4

  x1 : Ramp for platforms - Car and SUV

  Printing required 1 time

  
  Plate - 5
  x1 : Bottom plate (Type: SUV, 4x4), height - 10.3cm
  Printing required 1 time
  ⚠️If you start with a SUV - 4x4 type model, printing plate 1 is not necessary.

  
  Plate - 6
  x1 - x∞ : Middle plate (Type: SUV, 4x4), height - 10.3cm
  Printing required 0 to 99 times

  
  Plate - 7 - 8 - 9

  x4 : Height extension - 1.5cm
  x4 : Height extension - 2 cm
  x4 : Height extension - 3 cm

  Printing required 0

  
   

• Configuration :
  - You can configure your shelf as you wish, there's no real height limit
  - You can assemble between 6 to 10 platforms for a stable structure

  - Height extensions are not really necessary, unless you mainly use the car type plates which are 8.3cm

   

  (I haven't tested such a height, but below 10 platforms, the structure should remain stable)
   

⚠️Let the plate cool before detaching the 3D parts⚠️

Short Presentation