Nintendo Switch 2 Steering Wheel Controller Hanger
Print Profile(1)
Description
UPDATE: After a couple of weeks the PLA begun to warp and the controllers would no longer sit in them. I have revisited and updated the design and it is now stronger and the controllers sit in a better position.
A simple Switch 2 Steering Wheel Controller hanger that slots on to a shelf of any kind (such as a media unit, etc.).
The shelf ‘slot’ gap on my model has an inner height of 16mm based on the shelf I hang these on. I have included the Autodesk Fusion file for you to hopefully easily edit the slot with one simple parameter change in the file. To do this you can follow the steps below to edit the model in Fusion. Alternatively you can use Maker World's Parametric Model Editor to adjust this parameter.
- Download and open the Fusion file in Autodesk Fusion.
- Navigate to Solid > Modify > Change Parameters
- Edit the single favorited parameter (d95) and adjust the size to you shelf. Once you do this you will notice the model will adjust the heigt of the upper slot bracket automatically.
- Re-export this into your slicer and print.
 |  |
I hope this helps other with their controller organization and storage. Please let me know in the comments if you have any suggestions or questions.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)