Kitchen Aid Pro 600 6qt Chute and Splash Shield

Chute and Splash Shield for the Kitchen Aid Professional 600 (6 Quart) Bowl-Lift Mixer

Chute attaches to accessory drive with anti-swivel pin and locked in place with the accessory screw (do not over tighten).  Provides easy pouring of ingredients when the bowl is lifted and with the machine running or not (clears all paddles and whisks and dough hook that I own, please check your clearances).  120mm opening at the top, slanted for ease of access and support-free printing.
 

Splash-guard attaches to the lip of the bowl (bowl's lip outside diameter = 249.5mm).  Print inverted, fits on 256mm or above print beds (will not fit on A1 Mini).  Splash guard has 140mm opening to be used with or without the chute but, check your clearances.  There is a notch at back of the Splash-guard to clear the bowl locking clasp for the 5.5qt bowl.  Add this splash guard after adding whisk/paddle/hook attachment and raising the bowl.  Remove first.

I recommend PETG-HF, print inverted, Standard 0.2mm layers, 15% Gyroid infill, no supports required. 
 

Thanks to: @dudesirmark for making this model possible. 

Chutes and Shields for other Kitchen Aid models:

Kitchen Aid 550+ Pro (5qt): https://makerworld.com/en/models/1513705-kitchen-aid-chute-and-splash-shield#profileId-1602235
The splash shields fit this Pro 600 model too.


 

Kitchen Aid Artisan Chute:  https://makerworld.com/en/models/1522695-kitchen-aid-aritsan-chute#profileId-1595855

The 7 qt, Bowl-Lift Versions of the Chute and Splash-Shield are available here:

The Chute fits the Pro 600 version too