Anycubic Kobra S1 / Kobra S1 Combo Poop Chute
Print Profile(2)
Description
After searching for a poop chute for the Anycubic Kobra S1 Combo, i decided to make my own with all the good inspirations i saw. It is slightly over-engineered.
You can remove the container by lifting it up. You need no magnets.
The wall thickness is 2.8mm at the container and 3.2mm ath the chute..
Testet it now few weeks and works great.
You will need no supports if you print it in the original orientation.
I used at the marked position a 12mm long screw, the others are the orignal one.
I used PETG for the print, but you can also use PLA or something other like ASA or ABS.
The white container had a small collision which was redesigned at the blue one.
Boost Me (for free)
With a BOOST you can support me, that i can create more cool models for the community. THANK YOU!
Would be happy to see your makes!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)