Gloster Gladiator Flying Over HMS Furious hueforge

For Personal Use Only: Print as many as you like for yourself
Commercial License : Not allowed unless you hold a valid license on Makerworld or from my Patreon

Gloster Gladiator Flying Over HMS Furious – “Furious Gladiators”  Hueforge 3D-Printed Aviation Artwork 

This stunning Hueforge 3D-printed artwork captures a fleet of Gloster Gladiators soaring above the Royal Navy’s HMS Furious, titled “Furious Gladiators.” A tribute to the daring spirit of naval aviators, the piece depicts the elegant biplanes in formation flight — engines roaring, wings catching the light — as they patrol the sea below. Every line and shadow conveys the grace and grit of early carrier-borne aviation.

Created using the innovative Hueforge system, this piece is made entirely from layered filament, not paint or ink. Each layer builds tonal depth and texture, resulting in a rich three-dimensional appearance. The black, grey, and blue tones bring contrast and realism to the composition, with the carrier and clouds subtly emerging from the background.

A perfect choice for aviation collectors, naval historians, or enthusiasts of WW2-era aircraft, this Hueforge print combines technical precision with artistic depth — a tribute to Britain’s pioneering naval air power and the timeless beauty of the Gloster Gladiator.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x135.4mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #151715 PLA Deeplee Black  Transmission Distance: 0.1
    #626f89 PLA Deeplee Blue Grey  Transmission Distance: 2.5
    #8e8f8f PLA Deeplee Light Grey  Transmission Distance: 1
    #ffffff PLA Deeplee White  Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Grey
    At layer #13 (1.12mm) swap to Light Grey
    At layer #20 (1.68mm) swap to White for the rest.
 

You can see my other Military Hueforge in this collection: https://makerworld.com/en/collections/14280792-military-hueforge

You can Download a stand I have designed to fit  my Hueforge Artwork WITH a border at https://makerworld.com/en/models/1873510-hueforge-display-stand-for-prints-with-borders#profileId-2005518 or for Hueforges WITHOUT a border use this one: https://makerworld.com/en/models/1872617-hueforge-display-stand-for-prints-without-borders#profileId-2004540

If you print this model, please upload a photo of your result, Rate the print and leave a Review. 

Not only does it inspire others in the community, I'd love to see what people have done!