NFC TAG ID tag for dog flea collar
Print Profile(3)
Bill of Materials
- NFC round Card pvc NTAG 215 x 1: 1 per pezzo
Description
ID tag with integrated NFC tag for dogs, to be inserted directly inside the flea collar. An excellent choice for dogs that only wear a harness and spend most of their time with only a flea collar, in case they get lost.
The 0.8 mm thick NFC tag must be inserted during the print pause (for better adhesion, it is recommended to sand the NFC tag on the printing side of the layers and apply glue stick on the side where it will be placed). It will then be possible to write the owner's and dog's data into the NFC tag using the appropriate smartphone application. It will be possible to read the owner's contact data by bringing a smartphone with the NFC function active close to the tag.
If you liked this project, consider following us :) It can be used commercially. In addition to the print plate with 1 paw and 1 bow tie, I have also uploaded 1 print plate with 22 bicolor bow ties.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (9)