Gridfinity box for holding rubber gloves

🪶 Brief Description:

Practical storage box for rubber gloves in the Gridfinity system
With integrated text and decorative strips – matching my modules in the Outdoorchef Heat Outdoor Kitchen
No support needed, directly printable, single or multi-color possible

📖 Description:

This box serves for the organized storage of rubber gloves and integrates harmoniously into existing Gridfinity layouts
It is designed for a glove box with dimensions WxDxH 220 × 112 × 56 mm and is part of my series of Gridfinity bases for the Outdoorchef Heat Outdoor Kitchen

Thanks to the integrated text and decorative strips, the design remains uniform and functional

The construction is designed so that no support is required

The model can be printed in single or multi-color

📦 Three variants are included:

• With text and decorative strips 220x112x56
• Without text and decorative strips 220x112x56 (neutral version)
• Without text and decorative strips 220x120x60 (neutral version)

💡 Note on the Basis

This model is based on Gridfinity by Zack Freedman
an open, modular organization system for 3D printers
The original concept and dimension definitions come from him – my model extends this system specifically for rubber gloves

⚙️ Recommended Print Settings:

Material: PLA
Layer height: 0.2 mm
Infill: 15–20% (Grid or Gyroid recommended)
Nozzle diameter: 0.4 mm
Support: ❌ not required
Print bed: 60 °C

🛠️ Assembly:

The box consists of two parts
With some glue, these can be precisely glued together
Make sure both parts are cleanly aligned to achieve a flush connection

✅ Note:

If needed, I can gladly adapt the box for other dimensions or uses