ClockworkPi PicoCalc Sturdy Carry Case

Protect your uConsole PicoCalc with a tough, practical enclosure designed for everyday use and field durability.

This rugged 3D-printed case is purpose-built to keep your uConsole PicoCalc safe during transport, storage, or outdoor work. The body is printed, providing excellent impact resistance and rigidity while maintaining a clean, lightweight form.

The TPU seal enhances dust and splash resistance, but it isn’t strictly necessary for most users— the case still provides solid protection and a secure fit even without it.

Hinges

• Use 3 mm diameter, 30 mm long hinge pins (example: https://amzn.eu/d/g13dLjq).
• Insert the pins straight and check that the hinge rotates freely before final assembly.
• Alternatively 3x30mm screws would also work

Hole calibration (recommended)

• Many hinge-pin holes are printed or punched slightly undersize or can become misshapen during manufacturing. To ensure smooth hinge action, use a 3 mm reamer to gently open and true the holes. Example: https://amzn.eu/d/gsn8QyP.
• Ream in small, controlled passes — test-fit the pin frequently until it slides in smoothly but without excessive play.