Samick Sage Vertical Wall Mount

I modified the original file to have extend the Z axis. This let's my samick sage fit inside and not slide out. I also added two screw holes for 4mm screws so you don't need to use double sided tape.

I would recomend you print with 6 walls to increase the strength. I printed with 4 walls and I can hear cracking when I slide the bow in… Although I haven't had issues with tearing. I also wrapped the two grips with electrical tape to make sure the bow has some more friction and so it wouldn't scratch the bow.

I printed it in black Silk PLA which is probably the worst option (very low strength).

I recommend PETG or at least regular PLA.

Seems to work well, thank you to the original author.