Magnetic Fidget Sword
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
Thanks for your Support! Boost Help Greatly!
Sword will suck itself in one way and shoot itself out if you reverse it! You can click it like a mechanical pen.
Post Some Pictures of your Swords, I would love to see what color combos people come up with!
Requires 12 6X3mm Magnets, LINK DOWN BLOW in materials list.
After you do the below steps to get the Magnets in you will need to super glue the two half together. The little block that prints goes in the sword handle to help line up the side while the glue dries. And the Scabbard clips together but still need a little glue on the rims.
Here a Tool to Help press the Magnets in if you have trouble. There are tight fit so they don't come out
https://makerworld.com/en/models/21186#profileId-19454
Magnet Placement: have magnet North pointing out on one side of the sword and magnet South pointing out of the other side. And do the same with the Scabbard North pointing out on one side and magnet South pointing out of the other side. I recommend a tiny drop of glue under the magnets.
_________________________________________________________________________________________
I enjoying Making Models to share!
Boost and Memberships Help Greatly to be able to spend the time and filament it takes to test these prints to perfection.
THANKS FOR YOUR SUPPORT!
Membership
Hope My work bring you some success!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (428)