Its On My Mind

cover

plate_1.png

plate_2.png

qw.png

SF50_A1mini

2025-11-09_88cfa1a2bc2898.png

SF50

guy_1258537704

IMG_1383.jpeg

IMG_1384.jpeg

Only use this if the nonsupport profile doesn&#39;t work for you! This is for the guys who have bad bed adhesion but still want this. Important note: remove the supports from balls after you print them, it is easy to peel off. If this helped a 4 or 5 star rating would help a lot!  Also look at the second picture if you want to see the distance difference.&nbsp;These were designed because I felt that the original BBs were lacking in distance, so these were designed to shoot about 1.5-4 ft further than the original (2nd picture).I also managed to make them under 2.5 grams, for 10 of them so it&#39;s not going to take up much filament.If you are having adhesion issues I suggest making sure the build plate is cleaned, and if you have 3d printing glue, to use it, if that fails, turn on supports, it won&#39;t add much filament.

Better supported Faster&Farther BBs, only 2.5 grams for 10

10 BBs

Purple Dreams

PerfectBBs_square.jpg

e97f50cf-1770-400e-8ce9-9b7d9b69f7b5.jpeg

10 x Print Optimized BBs [updated]

The 3D Print Factory

2025-10-09_bc665d50aef89.webp

40*12 Ammo 480 bb's for a1 mini

IMG_1375.jpeg

IMG_1376.jpeg

IMG_1377.jpeg

If this worked a quick 4 or 5 star rating would help a lot!Made for the people who had mag adhesion problems.0.3 first layer and slower 1st layer in the profile along with other setting help a lot to keep the mag on the bed.&nbsp;Tips: Use 3d printing gluestick or adhesive in the center of the build plate, where the model will be.Could wash your buildplate to free it from oil, grime, etc.

better mag adhesion, slow 0.3 first layer efficient settings

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

user_3846281509

Screenshot 2026-03-26 at 5.26.19 PM.png

updated with better settings a1 mini my friend was having issues

0.2mm layer, 2 walls, 10% infill

LukeSkywalkr

Screenshot from 2026-04-09 14-57-01.png

Applied a cool design to the slide

Cool Design Slide

Screenshot from 2026-04-12 20-06-29.png

put a small 1911 grip for show…print upright

With 1911 grip

Gemini_Generated_Image_m1vik2m1vik2m1vi.png

Replaceable spring

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<figure class="media"><oembed url="https://youtube.com/shorts/nHdBsq8pxaw"></oembed></figure>The BB Launcher SF50 is a 3D printed launcher that uses a strip-fed loading system holding 50 BBs for fast  loading. The design includes minimal hexagonal grips that provide both a firm hold and space for the magazine locking mechanism.&nbsp;You can find the BB strip model in the following link: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1871741-50-round-bb-loading-strip#profileId-2003507">https://makerworld.com/en/models/1871741-50-round-bb-loading-strip#profileId-2003507</a>&nbsp;Please note, this is an experimental model, and results may vary depending on your printer and settings. Feedback and suggestions for improvements are always welcome.

BB Launcher SF50

ASIA

Print Profile(10)

Description

Comment & Rating (746)

License

Related Models