Dice cube fidget spinner for roleplay (DandD)
Print Profile(2)
Bill of Materials
Description
3D Printed D6 Fidget Spinner Dice – Each Side Spins!
This unique fidget spinner combines the fun of dice with the satisfying spin of a fidget toy!
Designed as a large D6 (six-sided die), each face rotates independently, letting you spin, roll, and fidget in endless ways.
Perfect for makers, gamers, and anyone who loves a clever twist on classic dice design.
It has the following dice added:
- D4
- D6
- D8
- D10
- D12
- D20
Boost Me (for free)
Like it? Give it a Boost and help it roll further!
Assembly and materials
this is a multi part model and you'll need some hardware for the best spinning.
It uses 6x the 608 bearings that have minimal slop.
and I would advice some strong 2k glue. CA glue will work but the bond might not be strong enough.
Make sure your bearrings spin fast and freely beforehand!
- After removing the suport material, glue the bearing connectors to the dics.
- When the glue is fully cured, you can push the bearing over the conector and it will click into place.
- Then slide the bearing into the designated slot on the cube (for instance: the 12disc with the corect numbers on the cube)
- If the bearing will not stay in place (it should be pressfit) you can add a dab of glue to the side of the bearing to attach it to the cube.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)