Search models, users, collections, and posts
Batman Logo - Adam West Era - HueForge
IP Report
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
1 h
1 plate
0.08mm layer, 2 walls, 100% infill
1.7 h
1 plate
Open in Bambu Studio
Boost
37
51
2
3
126
33
Released
Description
I took the adam west batman logo and put it into hueforge and made a print from it
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Sapphire Blue
At layer #12 (1.04mm) swap to White
At layer #21 (1.76mm) swap to Savannah Yellow for the rest.
Documentation (1)
Other Files (1)
batman logo_describe.txt
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)