Search models, users, collections, and posts
SIMRACING REV light RGB bar for TS-PC
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
8
25
0
1
37
12
Released
Description
RGB LED bar rev light for the TS-PC base based on Arduino Nano running on SimHub software. You will need to connect in series two 8-bit WS2812 5050 RGB LED, and then connect it to the Arduino nano signal wire goes to some of the digital pins. Then, you need to set that exact pin in the SimHub software. You can find a bunch of tutorials on how to set it up. I attached mine with double-sided tape to the TS-PC base. Arduino is mounted inside with M1.6x8 mm. Holes on the front plate are for glue or nail polish( not as strong as glue and but it holds together and you can simply put it apart) ENJOY !
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)