The Strike - Whispers of the Hood 10
Print Profile(1)
Description
Boost Me (for free)
Boost = fuel for the next design! If youāve enjoyed my work, hit Boost and be part of the creative streak. Also, tap Follow to catch the next drop.
Membership
You can sell physical prints of this model as long as you subscribe to my Commercial License Membership.
š”ļø Whispers of the Hood ā No. 10: The Strike
Some figures offer guidance. Some hold secrets. This one stands ready.
The Strike, tenth in the Whispers of the Hood series, breaks the stillness with bold intensity. She stands firm, eyes forward beneath her hood, blades drawn at her sidesā¦ not yet in motion but already commanding. Her stance is wide, grounded, and balanced. Not a whisper... a warning.
There is no flowing fabric or open gesture. This is resolve made form. Her sculpted armor-like bodysuit reveals strength rather than softness. Every line speaks of precision, preparation... and purpose.
She is not defending. She is not asking. She has already decided.
If she challenges your print queueā¦
š¾ Save the collection
š„ Like to sharpen the edge
š£ Follow to feel the next whisper
Stillness before the strikeā¦ is never silence.
Print Profile
- 0.12mm layer height
- 2 Arachne walls
- 5% infill
- Supports: tree (auto)
- Multicolor capable (separate plates)
Plates
- Body
- Base
- Handle
- Blade
Let me know how your print goes or if you need tweaks. And of courseā¦ photos are always welcome!
Key Printing Tips:
- Disable āStrength ā Detect Thin Wallā ā gives smoother, cleaner surfaces on detailed parts.
- Always check the slicing preview in Bambu Studio before starting the print.
- Support removal trick: Cut supports into small chunks first, then gently loosen ā they usually pop off cleanly without damage.
- Some plates use lots of supports, if so ā for reliable prints use these filament settings:
- Filament Overrides
- Z Hop When Retract: 0.6 mm
- Z Hop Type: Spiral
- Travel Distance Threshold: 1 mm
- ā Enable Retract When Changing Layer
- Also, disable these settings in Bambu Studio if Variable Layer height is used:
- Supports
- ā Disable Independent Support Layer Height
- Others
- ā Disable Reduce Infill Retraction
- Iāve found that a 0.15 mm top Z distance works best when printing with variable layer height.
- Supports
- Filament Overrides
Happy printing! Can't wait to see photos of your prints! If you're scaling, experimenting or encounter any issues, let me know ā your input helps the next iteration. Please share your feedback for any rating below āāāāā so we can work on improving, thank you!
Boost Me (for free)
Boost / like / collect / follow if it made your day! š
Membership
Now that youāve printed this model, are you happy with the results? If so, why not sell it? With a subscription to my Commercial License Membership, youāre free to do so.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)