Smoggy3D

cover

DSC_3127.JPG

DSC_3128.JPG

both.jpg

split1.jpg

render2.jpg

Body

plate_1.png

Antlers

plate_2.png

Eyes

plate_3.png

Nose

plate_4.png

No AMS needed!Parts need to be glued in.

Separate Parts, 0.12mm layer, 2 walls, 8% infill

ams.jpg

AMS, 0.16mm layer, 2 walls, 7% infill

ONE PLATE

Lukas

Obrázek WhatsApp, 2025-11-14 v 16.56.33_0f97d6be.jpg

Knitted Reindeer.png

<ol><li>Layout Consolidation Protocol:<ul><li>The Upgrade: The entire model set was consolidated from the original four separate build plates down to a single, highly-optimized plate with full AMS utilization.</li><li>Result: This strategic reduction eliminates three time-consuming plate swaps and drastically cuts down on manual preparation, resulting in a significant and measurable saving in overall print time and user effort.</li></ul></li><li>Print-by-Object Strategy (Critical Safety Feature):<ul><li>The Upgrade: The print sequence is set to &#34;Print-by-Object&#34; (Object Sequencing).</li><li>Result: This is a critical reliability upgrade for printing multiple, small, separated components. It eliminates the risk of the print head colliding with already completed parts, ensuring a high-success-rate, fail-safe print without needing enclosures.</li></ul></li><li>Low-Waste Flow Protocol (Material Economy):<ul><li>The Upgrade: Retraction settings were meticulously tuned for Bambu PLA Basic and the AMS flow.</li><li>Result: This fine-tuning is focused on achieving a clean-flow state to minimize stringing and material residue, which directly results in less required flushing volume during color changes. This provides a massive, verifiable reduction in filament waste for the user (Low-Waste Production).</li></ul></li><li>Optimized Structural Efficiency:<ul><li>The Upgrade: Infill set to Gyroid (with appropriate density, e.g., 8%) and print speeds were fully optimized.</li><li>Result: Gyroid provides excellent multi-directional support for the decorative set. The profile&#39;s overall tuning ensures the fastest possible total print time (due to the consolidation and P2S optimization), ensuring the entire set is produced efficiently.</li></ul></li></ol>&nbsp;

P2S, P1S|One Plate|Original Size|0.16mm layer|2 walls

Pandastic

IMG_0269.JPEG

Renna ingrandita al 300%Riempimento abbassato da 15% a 8%

Reindeer scaled up to 300%Infill reduced from 15% to 8%

0.12mm layer, 2 walls, 15% infill

alepero_creative

5956405610288974704.jpg

5956405610288974706.jpg

- ridimensionato tutto al 150% - 2 piatti ottimizzati per AMS - infill gyroid al 4%

- scaled everything to 150% - 2 plates optimized for AMS - 4% gyroid infill

0.12mm layer, 3 walls, 4% infill

Print Happens

mini reindeer 1 color best quality.JPG

Mini single color version - 0.12mm layer, 2 walls, 7% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🦌 Knitted Reindeer 🦌&nbsp;No AMS needed! Parts need to be glued in.

Knitted Reindeer - Christmas

ASIA

Print Profile(6)

Bill of Materials

Description

Comment & Rating (678)

License

Related Models