Search models, users, collections, and posts
Albator / Captain Harlock (HUEFORGE)
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
10.3 h
1 plate
Open in Bambu Studio
Boost
38
78
23
7
105
32
Released
Description
Hi guys, this is my first posting/sharing hope you will bare with the result or some error it mights contain.
Please comment to make some correction if needed.
(Result was nice on my printing, see pictures, so hopefully file is ok)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #30 (2.48mm) swap to Red
At layer #34 (2.8mm) swap to Gray
At layer #39 (3.2mm) swap to White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #30 (2.48mm) swap to Red
At layer #34 (2.8mm) swap to Gray
At layer #39 (3.2mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (23)