Lady Deadpool Heart Hands Hueforge 200x200

A Hueforge of an original piece of art I created for Lady Deadpool/Ladypool. I hope you like it!

Project: Lady Deadpool Heart Hands.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffe17f PLA BambuLab Matte Lemon Yellow  Transmission Distance: 4
    #e4bdd0 PLA BambuLab Matte Sakura Pink  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 6.1
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #10 (0.88mm) swap to Basic Red
    At layer #17 (1.44mm) swap to Matte Lemon Yellow
    At layer #21 (1.76mm) swap to Matte Sakura Pink
    At layer #23 (1.92mm) swap to Jade White for the rest.

As always, if you'd like to resize it, make sure you ONLY change the X and Y; do NOT change the Z value! (Make sure uniform scale is unchecked), I've added another print profile with pauses at the color change layers for people with no AMS; just change to the colors listed above at the layer stops and you are all set.