Subaru Forester 6th Gen 2026 Bottle Cup Adapter

Summary

Upgrade your Subaru Forester’s centre console! This 3D printed insert lets you fit larger 2 L sipper bottles or wide reusable bottles into the stock cup holder.

About this Model

The factory cup holders in the 6th Gen Subaru Forester (MY25 MY26) are designed for small cups, not the large reusable bottles many of us use today. This custom adapter slots directly into the existing cup holder and raises the usable area to fit bottles up to 114 mm in diameter, including most 2 L plastic sipper bottles, 3.5 in, and 4 in bottles.

Once inserted, the adapter forms a stable and snug “cup” above the existing one, allowing your bottle to sit securely without wobbling or tipping during drives. No permanent modification is required, just drop it in and go.

Print Details:

• Printer: Bambu Lab X1C (or any Bambu Lab printer)
• Material: PLA+, PETG, or ABS recommended
• Layer height: 0.2 mm (adjust as preferred)
• Infill: 15–25%
• Supports: Not required
• Orientation: Print upright for best strength and fit

Notes:

• Designed specifically for the Subaru Forester 6th Gen (MY25 MY26) centre console.
• Check bottle diameter before printing to confirm fit.
• 3 models available for 3 different diameters (92mm, 105mm and 114mm)