Halo: Combat Evolved - Master Chief MK V Helmet

This is the MK V Helmet for the original Halo, Halo: Combat Evolved.  I have scaled this helmet to fit my head, and I suggest you scale the helmet and parts to fit your own head as well.  The helmet fits snug on my head, but needs to be left in two parts as your head will not be able to fit through the opening on the bottom of the helmet unless you scale it larger.  I PLA welded the parts together on the inside for added strength. 

The full helmet is scaled to ~60 size to fit on a build plate in order to allow me to upload it.  You can scale an print the helmet whole as decor for your desk, office, 3D print room, or anywhere you want to show it off.   

In the Raw files you will also find a file for a combined Parts 2&3, uncut, scaled to fit onto an A1 build plate.  All Supports removed very easily and mostly in large chucks, but I admit I probably used more supports than are needed if you were to change the orientation some, or paint your own supports.

When printing Parts 2&3 I was left with a lot of rough layer lines (as seen in the pics) this is fine for me as I am going to do a lot of post processing, but you may want to reorient the parts so that you do not get those lines, or print with a smaller layer line.  

 

This model was originally uploaded by Icychilz on Thingiverse https://www.thingiverse.com/thing:2658485.  Licensed under the Creative Commons - Attribution license.