Flysight Falcon FG01 / FG02 Pro58 FPV Tilted Cover

I really love this idea of the original creator, it is mandatory to add the tilt to be able to easily control the wheel.

However, for me it did not perfectly fit with the Falcon FG02 goggles and the Eachine Pro58 I received, it was just coming loose too easily, so I did the following changes:

• Added more space for display and connection points internally.
• Added bigger clips for a tighter fit.
• Changed display position (about 1.5mm further down).

Make sure to check the description of the original part before printing this: https://www.thingiverse.com/thing:3045960

Be aware: This needs a little bit of force to click in place, but once there it stays where it is supposed to be and even holds the module in place without double-sided tape.

Print Settings

Printer Brand:

Prusa

Printer:

Supports:

Yes

Resolution:

Infill:

100%

Filament:

Prusa Original PLA

White

Notes:

Post-Printing =============

You will need to clean up the print with a scalpel after the print. Especially cut a proper 90-degree angle for the click in latches.rnrnEachine Pro58 Module needs modification according to the description in original creators post linked further above.

Category: Sport & Outdoors