Merry Christmas Sign (2) (Alt)

Hey All,

Here is Christmas sign #10. It is an Alt version of Merry Christmas Sign (2) where the presents are essentially changed with snowflakes, and I used a different color combo to show the possibilities. The colors can all be easily changed in Bambu studio by each individual part under objects, so you can customize colors as needed (no painting needed). I added a second color in the pics to see some of the options you have when changing.

Here is the main version if you are interested: https://makerworld.com/en/models/1937021-merry-christmas-sign-2#profileId-2080017 

Ironing is turned on for an extra smooth top look. 

This sign can also be scaled to fit different size printers as needed.

The main sign is free standing like in the image (stand optional). There is also a version that is just thin so it uses less filament and time, but you will need a stand for it. The final one is a new extra thin that is made to use the least amount of filament and in extra flat to use with double sided tape or command strips etc. All of these are in the main print profile.

There is also a magnet version that is much thinner and has pre inserted slots for four (10x3mm) magnets (this size can be changed by altering the negative cylinders I have in objects, just make sure to adjust the pause if needed) . There is a pause ready for these so you can insert, then resume easily. It has its own print profile.

If you are interested in a stand that can be used for both the thin and free standing versions (as seen used in my images) there is a great one here:  Made by maker Kopp3D ( I used the medium version): https://makerworld.com/en/models/479988-simple-display-stand-parametric-fully-customizable#profileId-405824

I will attach materials and filament colors I used in my example below.