Demon Slayer
Print Profile(1)
Description
Layer height of 0.08mm with 100% infill, first layer height of 0.16mm
Model size is 150.09x200mm
You can print at higher layer heights below the base thickness of 0.48mm
Maximum allowed thickness 2.24mm and actual thickness 1.43999mm
#080a0d PLA PolyLite Black Translucency value TD: 0.3
#e2dedb PLA PolyLite White Translucency value TD: 5
This print uses 2 filaments
Filament change instructions:
Start with Black
At layer #8 (0.72mm) change to White until the end
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)