Sewing Bridge
Print Profile(2)
Description
SEWING BRIDGE for all OVERLOCK machines with 7 mm
SEWING BRIDGE for COMBI machines with 10 mm
The bridge is designed in a ramp shape for better machine access.
Supports are not needed as I created my own support for the model. The support block is labeled “Support” and can be easily removed.
IMPORTANT for printing: "Detect thin walls" must remain activated! Because the created support is connected to the model with very thin lines.
Also, the 10 mm brim should be kept. The model is printed at a 45° angle and stands on a 2 mm edge. After several test prints, I achieved the best results this way without the model lifting from the plate.
If you have a printer with an AUX fan, it's best to deactivate it for printing.
If you like the model, I would appreciate a rating or a boost.
Have fun melting.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)