Solderless 90-degree LED strip connector - Free 3D Print Model

Search models, users, collections, and posts

Macrosign 3D

Tools>Other Tools

IP Report

Print Profile(1)

All

A1 mini

P1P

H2D

P2S

X1 Carbon

P1S

X1E

H2S

H2D Pro

H2C

X2D

A2L

0.2mm layer, 2 walls, 5% infill

Designer

14 min

1 plate

5.0(8)

Open in Bambu Studio

Boost

1040

2681

421

160

Released

Description

Content has been automatically translated.

Show original

I created this splice out of the need to quickly and solderlessly connect the LED strip to the wiring. This model works for strips with 4 contacts and also for strips with 2 contacts, as long as they are 10mm wide.
It's best to glue the bottom part of the strip and wire to the connector to prevent it from coming loose.
I am new to modeling and printing, so any suggestions and improvements are welcome.
I hope it helps those who need it, just as I needed it here..lol

The part with the embossed “L” is where the LED strip goes.
The part of the lid with a higher protrusion is the part that presses the wires to make contact with the LED strip connectors.

Comment & Rating (20)

@0mikron

Soldering it wouldn't take a second longer than this and be so much more secure though

The designer has replied

@Rogerio1001

Good afternoon I made this model because some people do not know how to solder but it does hold up I use LED strip lights and it does not get hot

Show original

@LuckySnipes

yes not everybody has soldering equipment or skill.

@GlowLayers

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

It turned out awesome.

@user_1761114406

I'm rather sure this won't hold long unless you solder it ;)

The designer has replied

@Rogerio1001

Welding is the best solution, some people don't know how to weld, if you glue the tape to the connector and the wires, it won't come off either

Show original

@renatodervelan

Boosted

Fantastic!

Show original

@user_2642562025

Good day

@YucaEnUtah

What are the specs on those wires and the best place to get them? I would like to use this for a light box I am currently printing. Thanks

The designer has replied

@Rogerio1001

Wire for RGB LED strip

Show original

@user_2496037713

I like this alot. you can still solder if you like and this print is still good. if not you can still manage a connection. This print doesn't say dont solder its just an option.

@Bienchen3d

Print Profile

0.2mm layer, 2 walls, 5% infill

Perfect 👍 excellent

Show original

@x_rev

Print Profile

0.2mm layer, 2 walls, 5% infill

ottimo!

@alexvzc

it would be super cool to have a custom PCB to bridge the strips.

@WobbleNet

These strips can get fairly hot . Are you printing in PLA ? I guess in part as the strip is not in the print much it’s holding out but curious all the same

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.