Compact apple watch wind up travel charger holder - Free 3D Print Model

Search models, users, collections, and posts

oldflattop

Tools>Organizers

IP Report

Print Profile(5)

All

P1P

H2D Pro

P1S

X1E

A1 mini

X1 Carbon

P2S

H2S

X2D

A2L

H2D

H2C

USB-C - optimal - 0.16mm

Designer

54 min

1 plate

4.9(701)

USB-A - optimal - custom support

Designer

1 h

1 plate

4.9(115)

P2S/P1S Ready|Variable Layer|0.2mm|2 walls|7% infill

39 min

1 plate

4.9(57)

Cover Fuzzy Skin, 0.2mm layer Quality, 2 walls, 7% infill

2.1 h

2 plates

5.0(10)

Click to see more

Open in Bambu Studio

Boost

4175

13040

1093

439

11 k

9.7 k

Released

Description

Intro

This is an updated, more compact and better working version of the first apple watch wind up travel charger holder.

I needed an easy way to carry an extra apple watch charger in my bag, without tangling the cable. This design holds the puck securely and allows you to wind up the cable inside by spinning the top.

Updates

2025-11-20: I've also made an adaption of this design for the apple magsafe charger.

2025-11-24: There is now a USB-A version of this. I don't have that cable myself, so if you print it it, please let me know that it works right. Thanks.

Compatibility

There is a version for USB-C and one for USB-A.
The winding / unwinding action might be smoother using the newer braided cable version of the Apple watch charger. With the old rubber style cable, it can get stuck more.

Printing instructions

Prints without supports. If you have decent bed adhesion, there's no need for a brim.

Assembly

Feed the USB-C plug through the top piece, and snap the puck into place.
Now feed the plug through the opening in the bottom piece (from the inside going out)
Fit the small rod into the underside of the top piece
Fit the drum/rod thickener over the rod, with the cavity facing down.
Snap the top piece to the bottom piece
Optional: use a tiny drop of lubrication oil (like the one that comes with the bambu printers) on the friction areas (see image)

If you need to disassemble the pieces again, squeezing the bottom piece on either side of the opening makes this easier. Use a pointy object to push the charging puck through the small circular hole.

How to use

To wind up:

Hold the bottom piece and twist the top.

To unwind:

Hold the bottom piece and pull the cable.

Boost Me (for free)

My other models

Do you also have an Oral-B charger that you want holder for?

Check out this Oral-B compatible charger holder here!

Documentation (3)

Assembly Guide (3)

wind-up-still.jpg

assembly.jpg

unwind-still.jpg

Comment & Rating (1093)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.