Lighter Sleeve Display - Free 3D Print Model

Search models, users, collections, and posts

Zacks3DPrints

Tools>Organizers

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

4.8 h

1 plate

4.9(38)

Open in Bambu Studio

Boost

667

1495

863

449

Released

Description

designed a lighter sleeve display (for bic sleeves). Will not fit Hex3D sleeves unless you scale up.

display

lighter sleeves

bic

Comment & Rating (48)

@CustomPrinting

This worked quite well with the lighter sleeves that I printed earlier in the day. It was a bit small for some of the cases I printed, but for the most part, it looks like this will work for almost all sleeves. In the second and third picture, the lighter sleeve on the left is the size that works. The one on the right is too big. All images are for reference

@sr.blue

bah thank you it helped me choose the model

Show original

@user_263711814

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

good print

@jebuz

Print Profile

0.2mm layer, 3 walls, 10% infill

would print again

@user_4108401729

Is this support for a small Bic

The designer has replied

Show original

@Zacks3DPrints

I do not have one for those

@user_2620882861

Hello, your have the project the expositor in de back ?

The designer has replied

@Zacks3DPrints

that one isn't my design. if your talking about the black thing

@user_1999033225

Print Profile

0.2mm layer, 3 walls, 10% infill

need to scale up a bit

The profile uploader has replied

@Zacks3DPrints

it all depends on the sleeves your printing. I know hex3d sleeves are on the larger side. but I mostly use Mystic Mesh sleeves

@DrGadgetz

Print Profile

0.2mm layer, 3 walls, 10% infill

Flawless

The profile uploader has replied

@Zacks3DPrints

Awesome! Thank you for printing!

@Gcraftsofanahua

would be nice but was too small for all the lighter sleeves I had made. guess I need to increase size

The designer has replied

@Zacks3DPrints

if your printing hex 3d sleeves, then it work for them. you would have to scale the x and y axis

@Rch3877

Print Profile

0.2mm layer, 3 walls, 10% infill

Thanks!!!

@user_2300946698

Print Profile

0.2mm layer, 3 walls, 10% infill

this is an awesome display stand. Thank you so much.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.