Street Lamp LED Tealight
Print Profile(1)
Description
Tealight holder designed like an older street lamp, with the LED tealight installed upside down.
All parts are individually printable.
Additionally, an M3 or M4 screw with a corresponding nut is required.
For better appearance and stability, the upper arch was placed on an extra support. Please use the print profile for best results! The stem is inserted into the base. The stem and upper arch are fastened with Holder1 and Holder2 (correct direction!) and an M3 or M4 screw and corresponding nut. The upper lampshade is screwed to the arch. The LED tealight is pushed through the tealight holder and inserted into the upper lampshade, and the holder is rotated 90° so that the tealight cannot fall out. Finally, the transparent glass body is placed onto the upper lampshade using the 2 retaining lugs. This works best by gently pressing the glass body sideways when placing it, where the retaining lugs are not present.
Please write suggestions and comments in the comments!
Of course, I always appreciate a like or a boost! Thank you for that!
I wish you much joy in printing and using it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)