Michael

cover

Screenshot 2025-11-04 094945.png

Screenshot 2025-11-04 095034.png

Screenshot 2025-11-04 095057.png

IMG_0205.jpeg

IMG_0206.jpeg

IMG_0207.jpeg

plate_1.png

Preset Nozzle temp is set to 220 C becuase I printed in tpu. Check your filament print temp and adjust it. Also my preset takes about 8 hrs to print becuase the way I like to print tpu is the most safe way I can, (aka, super slow and stable)  PS. This is the preset I used to print but feel free to experiment. And I would like to state this once again, This File was not made by me, all I did was took Gobuildas Step file for their part and made it into a stl file with a custom print preset for easier use.

0.1mm layer,2 walls,25% infill,!CheckUrFilamentTempCompatibi

IMG_0334.jpeg

IMG_0332.jpeg

IMG_0333.jpeg

More squishy version of the file above. This file only took 3 ½ hours to print and is softer becuase its infill is less and the speeds are set 50mm/s. Once again, make sure the nozzel temp is set to your filaments printing temp.

0.2mm layer, 2 walls, 5% infill 

https://www.gobilda.com/3613-series-gecko-wheel-14mm-bore-72mm-diameter/

Leave a like or comment on what you think about my model. Maybe that will inspire me to do better with my project posts. This Is Not My Design! I just took this file off of Gobuildas website and turned it into a stl file with a preset for printing with tpu. This was posted becuase I was needing this wheel as a print file so I decided that I might as well post this to help others. Enjoy!

Gobuilda Gecko Wheel

ASIA

Print Profile(2)

Bill of Materials

Description

Comment & Rating (2)

This remix is based on

License

Related Models