Princess Zelda Reincarnation of Wisdom

This is a model I made earlier, so I won't make major changes; I'll leave it as a historical record for myself. Thank you for your support.

*The cover color is the effect after simple coloring; the printed model is white*
1. The small model is printed at a 60° angle, and the large model is printed upright. The uploaded model is the small one printed at an angle.
2. See the front and back comparison photos for quality. I personally prefer angled printing because the front details are better than upright printing, and local overhangs are easier to sand.
3. The parameters have been optimized several times for Print in Place. The overall quality is as shown in the photos. There is only one thing to note: be careful when removing the supports from the two tassels on the skirt.