Narrow / Wide "Fan" angle spray pattern sprinkler
Print Profile(2)
Description
Boost Me (for free)
Please boost! It's free and supports my hobby
Description
Some of my most popular prints are the Igloo Hose Sprinkler v1 and v2 (https://rb.gy/nw0h1y). This one is the “fan pattern” cousin I made for the weird corners of my yard. I’m picky about my lawn and I’m also cheap, so instead of buying yet another sprinkler, I opened CAD.
The base ring keeps it from tipping over, the ribs keep it stiff, and the angled body throws a nice sheet of water exactly where you point it, with no moving parts to break. It is perfect for side yards, fence lines, and any spot where a long, narrow fan works better than a round spray.
Features
• Fan style spray pattern for narrow yards or fence lines
• Sprays up to about 15 ft at normal house pressure
• Base diameter around 4.7 in, low profile so it is hard to trip over
• Open ribbed design saves filament but stays rigid
• Integrated hose connector, no extra fittings needed
• No moving parts, and the jet holes are easy to clear with a pin or tiny drill bit
Recommended materials
I usually print these in PLA with no problems, but if your sprinkler is going to live outside full time, ABS or ASA will handle the sun and heat better.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)