kingkem print

cover

IMG_0170.JPG

Styling_21.jpg

Styling_21§.jpg

Styling_2W1.jpg

Styling_212.jpg

Styling_22221.jpg

plate_1.png

Bruno Pereira

IMG_20251228_172736.jpg

IMG_20251228_172739.jpg

The wheel on the image was printed using ludicrous mode, and a PETG not so good for those speeds. The profile settings for slicing are the ones that i normally use and that exhibit best quality vs time performance of all that i tested,  i suggest to use the print profile and then just let it print in normal speed dont push it to sport or ludicrous, because it has some slopes nad some overhangs that benefit from slower speeds.

0.16mm layer, 2 walls, 15% infill

All Same Color

IMG_20260317_100954.jpg

IMG_20260316_193757.jpg

IMG_20260316_193801.jpg

IMG_20260316_193928.jpg

IMG_20260316_193928_1.jpg

IMG_20260316_193931.jpg

IMG_20260316_193935.jpg

IMG_20260317_100958.jpg

IMG_20260317_101005.jpg

IMG_20260317_192337.jpg

IMG_20260317_192342.jpg

IMG_20260317_192346.jpg

Print Profile DescriptionThis model represents a BMW-style car wheel 🏎️ and is designed as a two-part assembly, consisting of the rim and a separate center cap 🔘. This allows for easy multi-color printing 🎨 without the need for AMS or complex filament swaps—simply print each part in a different color and assemble them for a clean final look ✨.Post-processing notes: Some minor difficulty may be encountered when removing supports 🧩. It is recommended to use fine-tip pliers 🔧:<ul><li>Gently squeeze the supports to weaken them 🤏</li><li>Twist slightly to help them detach cleanly 🔄</li><li>Take your time to avoid damaging the surface ⏳</li></ul>⚠️ Important: The center cap is a delicate part 🔘, so extra care is required when removing its supports to prevent damage ❗In the preview images, you may notice slight defects 👀—these were caused by using a lighter 🔥 to remove fine stringing. Due to the thin geometry of the part, this introduced excessive heat and caused minor imperfections ⚠️ Recommendation: Avoid using heat 🚫🔥. In this case, it wasn’t necessary, as the stringing was minimal and located on the back side, not affecting the visible result 👍Overall, the parts fit together well 🧩✅If you try this profile, feel free to leave feedback in the comments 💬—it helps improve the design and supports the creator 🙌 If you like it, consider giving it a boost 🚀

Two Separate Pieces Same Color|Optimized Print Profile

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

BMW Styling 21( picture model size) Model scale 1:14,5 (Ø70mm) Perfekt for display!<h3>Please let me now if you guys like to see more :) </h3><h3>I have other rims need feedback!</h3><h3>So let me know with a comment  “more” </h3><h3>if you like to see the other one´s!  </h3><h2>3D printing settings</h2>Kind of Printer: SLA Printed Printer: Elegoo Saturn 8K Material: SUNLU ABS-LikeSettings: - Layer height : 0.05 mm - First layer: 45 s, 5 layers - Rest : 3 s

BMW Styling 21

ASIA

Print Profile(2)

Description

Please let me now if you guys like to see more :)

I have other rims need feedback!

So let me know with a comment “more”

if you like to see the other one´s!

3D printing settings

Comment & Rating (11)

License

Related Models