Tonie House - Tonie Shelf
Print Profile(3)
Bill of Materials
- M3,5x20 x 10: Holz-/Blechschraube Selbstschneidend
- Metallplättchen x 14: egal welches
Description
Update in V3:
- rounded corner roof parts
- Radius at the tip
- Screw depth everywhere for 25 mm screws
- Additional opening for removing the charging plate through the base plate. Power supply can remain plugged in
- Elimination of metal band recesses - Alternatively, metal plates can be glued anywhere, smooth surfaces!
----
A simply built house for storing Tonie figures and the Toniebox.
There is space in the base plate for the station (Toniebox V1)
On the roof and on the walls, there is space for 2 magnetic strips each to attach the Tonies from the outside.
Each magnetic strip has a length of 12 cm.
Dimensions:
Width: 23 cm (roof)/20 cm (wall to wall)
Height: 28 cm
Depth: 14 cm
I used the magnetic tape from Gauder again:
Gauder Magnetic Tape Amazon: (3m for 15€)
https://www.amazon.de/dp/B07JM48NMN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
For assembly, I use M3.5x20 round head screws from the following set: (A total of 10 screws are used.)
Background: Counterbore for screw head D=7mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)