Motorcyle glove support
Print Profile(1)
Description
Hello everyone,
Here is my latest creation, which I myself needed: a motorcycle glove holder!
Attachment:
It hangs under a shelf using 2x M4x20 mm minimum countersunk wood screws (be careful not to drill through your shelf :p, the plastic thickness is 12.5 mm)
The cutting file is provided with a template defining the direction and location of the drill holes. The side indicated by the arrow must be flush with the edge of the shelf when drilling for optimal results!
Material:
I do not recommend using PLA; prioritize PETG or ABS, ASA, etc.
Usage:
It is specifically designed for gloves with cuffs (racing gloves, winter gloves) but should also work with shorter gloves.
Size:
My gloves are size M (Europe size), whether they are heated winter gloves or summer gloves, they fit perfectly.
I believe sizes S and XL will work without issue. If you have extremely small (XXS) or large (XXL) gloves, please let me know if the model works correctly. If not, I will offer versions with a re-worked scale :).
Settings:
The holder provides a very good sense of robustness while remaining optimized for filament consumption as supplied. The AMS part is just for decoration; if you don't have one or don't want to use it, fill the 2 colors with the same filament.
Property:
Please do not share this model outside of the intended scope. A like or a boost would be greatly appreciated :D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)