valeL87

cover

3.png

1.png

2.png

Immagine.png

Immagine2.png

Immagine3.png

plate_1.png

2025-11-03_f5df55ad2bd22.png

Top Box:0.20, supports, ironing on top surfaces with 65 ironing speed and 22 flow speed.Lower and taller Base Box:0.20, ironing on top surface, 60% infill.

TopBox_0.2mm layer, 2 walls, 15% infill

BaseHeight5cm_0.2mm layer, 2 walls, 60% infill

BaseHeight3cm_0.2mm layer, 2 walls, 60% infill

danada

PXL_20260614_045146335_edited.jpg

PXL_20260614_102501231_edited.jpg

PXL_20260614_044913269.jpg

This profile adds a dual-color paint layout to the original single-color model using Bambu Studio&#39;s native painting features for AMS and AMS lite users.<h4>Settings and Optimizations:</h4><ul><li>Efficient Multi-Color: Layer boundaries are optimized so the print only requires 6 total filament changes, minimizing purge waste to approximately 2.3g.</li><li>Flushing Volumes: Uses auto-recalculated flushing thresholds to prevent the dark accent color from bleeding into the primary light color.</li><li>Tuned Ironing: Ironing settings for the top surface have been adjusted to 30 mm/s speed and 12% flow. This slower, lower-flow pass ensures a smooth finish and prevents excess plastic from overflowing into the fine inset details of the face.</li><li>Supports: Tree supports are enabled with a 0.2mm Z-distance for clean removal from the lower overhanging lip.</li></ul><h4>Printing Recommendation:</h4>Allow the build plate to cool fully to room temperature before removing the model or separating the supports to prevent warping the flat lid or scuffing the top surface.

0.2mm layer, Multi-Color Lid Only (AMS)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Questa scatola è ispirata all&#39;iconico personaggio Miffy. Ho modellato due basi, di due altezze diverse. Le scatole misurano approssimativamente 8 cm x 10 cm x 3/5 cm di altezza. Ho caricato i file di profilo di tutte e tre le parti (base più bassa, base più alta e coperchio) laddove le principali modifiche alle impostazioni di default riguardano le impostazioni di ironing del coperchio e i suoi supporti e la densità del riempimento delle basi. Ho portato a 60 il riempimento per ridurre l&#39;aspetto della linea che spesso compare come risultato del passaggio dalla parte della base che è piena, alle pareti.  (benchy hull line?). Per ridurre i tempi di stampa si può ridurre l&#39;infill, in quanto non sempre la linea è realmente fastidiosa. Spero vi piaccia! :)

This box is inspired by the iconic Miffy character. I modeled two bases, of two different heightsThe boxes measure approximately 8 cm x 10 cm x 3/5 cm in heightI uploaded the profile files for all three parts (lower base, higher base, and lid) where the main changes to the default settings concern the lid's ironing settings and its supports and the infill density of the bases. I increased the infill to 60 to reduce the appearance of the line that often appears as a result of the transition from the solid part of the base to the walls (benchy hull line?). To reduce print times, the infill can be reduced, as the line is not always truly bothersomeI hope you like it! :)

Miffy - Small Decorative Box

ASIA

Print Profile(4)

Description

Comment & Rating (126)

License

Related Models