SMT Solder Paste Stencil Printer 钢网夹具

Supports minimum volume of 10cmx10cm smt steel mesh

BOM：

• 8x M3x4x4.2mm Heat Insert Nut (M3 thread with 4.2mm outer diameter, 4mm length)

• 8X M3X5mm Phillips countersunk screws

• 2X Hinge

• 3X M4X16mm Hand screws

• 7X M4 Nut

• 4X M4X15mm Phillips Pan Head Screws

Printing Tips：

• If you print with AMS, you need at least 5 layers on top of the four sliders
• Four of the weaker parts of the base needed to be strengthened. In the 3mf file I provided, I used the modifier and increased the fill to 60%

Gdemon X Watkins