I Am Not A Robot

cover

20251105_134903.jpg

PXL_20251103_173354425.jpg

P1012692.JPG

PXL_20251103_172619665.jpg

P1012694.JPG

P1012695.JPG

P1012696.JPG

P1012697.JPG

P1012698.JPG

P1012699.JPG

P1012700.JPG

20251105_134933.jpg

20251105_134854.jpg

plate_1.png

plate_2.png

What is cuter than a Teeny Box, a Teeny Tiny box.  This is not just a scaled down box, I did go back to the original model and adjust the sizes while keeping the tolerances.  The lid is not as tight of a fit as the larger box.

Teeny Tiny Box - Extra Small

2025-11-02_71f62c03641d88.jpg

This is the size that matches the Lowes Teeny Tote in the store.  There is a smaller “Teeny Tiny” version in a separate print profile.

Normal Teeny Lowes Tote - 0.2mm layer, 2 walls, 5% infill

20251116_160113.jpg

20251116_155949.jpg

This is an updated base and lid, with a latching lid.  The old design would not hold onto the lid, so I had to make a little tweak.  At the same time, I did tweak the main body to allow the black boxes to nest a little deeper.

With Latching Lid

200%

150%

plate_3.png

plate_4.png

plate_5.png

100%

plate_6.png

plate_7.png

plate_8.png

plate_9.png

nottingham82

Screenshot 2026-02-04 070813.jpg

PXL_20260204_150007694.jpg

This profile is the locking lids and tubs.  Printed in abs.  There are 1 200% scale tubs to a plate, 2 150% scale tubs to a plate,  4 100% scale tubs to a plate and 15 50% scale tubs to a plate.  So here are your presliced options for multiple sizes. &nbsp;&nbsp;0.16mm layer, 2 walls, 15% infill

Multiple sizes 50% / 100% / 150% /  200% Abs file

Same as the other multi size file but this has a brim.  My yellow was warping on 1 corner and this kept that from happening.  Only use this one if you are worried about abs bed adhesion and warping. 0.16mm layer, 2 walls, 15% infill

Multiple sizes with BRIM 50%/100%/150%/200%

Lukas

IMG20251109144953.jpg

Teeny Tote.png

<ol><li>Single-Step Batch Production:<ul style="list-style-type: circle"><li>The Upgrade: Consolidated the entire model from two build plates onto a single, optimized plate with Print-by-Object Sequencing enabled.</li><li>Result: Eliminates manual plate swaps and reduces preparation time by over 50%. Object Sequencing ensures a fail-safe production flow for multiple components, critical for high-volume jobs.</li></ul></li><li>Max-Flow Multi-Color Integration (AMS):<ul style="list-style-type: circle"><li>The Upgrade: Fully configured for AMS multi-color use and optimized for the Bambu High Flow (HF) nozzle.</li><li>Result: Leverages the P2S&#39;s maximum flow rate for the fastest possible material throughput, achieving rapid multi-color prints without compromising layer adhesion or speed.</li></ul></li><li>Dimensionally Perfect Shell Integrity:<ul style="list-style-type: circle"><li>The Upgrade: Wall generator set to Arachne.</li><li>Result: Guarantees perfect dimensional accuracy for the box&#39;s edges and lid-seating surface. Arachne&#39;s dynamic flow control is essential for functional parts to ensure the tote bins fit their designated rack perfectly.</li></ul></li><li>Structural Density &amp; Corner Resilience:<ul style="list-style-type: circle"><li>The Upgrade: Outer shell extrusion widened to 0.45mm.</li><li>Result: Measurably increases the structural rigidity and impact resistance of the tote&#39;s walls and corners. This is a necessary functional upgrade for a tote that will be frequently handled, dropped, and stacked.</li></ul></li><li>Clean-Flow Protocol (Speed &amp; Quality):<ul style="list-style-type: circle"><li>The Upgrade: Speeds and retractions have been completely re-calibrated.</li><li>Result: Fine-tuning ensures the fastest possible acceleration and print velocity while maintaining a precise clean-flow state. This minimizes stringing and blobbing, which are critical flaws for parts requiring stacking or tight-fit assembly.</li></ul></li></ol>&nbsp;&nbsp;

P2S High Flow Hotend|AMS 1 Plate|2 walls|5% infill

Nylund

Photo Dec 02 2025, 9 13 01 AM.jpg

Flat Front Tote (Perfect for placing labels)

Egemen

WhatsApp Image 2026-04-28 at 1.27.21 AM (1).jpeg

image_2026-04-28_013813233.png

Added Cylinder blocks to both lid and the box. They will engage together and hold the box tightly. It feels hard to close and open at first, but it will loose up. Tip for easy opening: Squeeze from the short walls with your one hand and close lid with other hand. &nbsp;High pressure to the lid to  close it with one hand. Hold from the one short side to open it with one hand. &nbsp;TRY 1 BOX FIRST IF YOU WANT TO GUARANTEE YOURSELF.MAKE SURE SETTINGS SUIT YOUR PREFERENCES. NOTHING CHANGED OTHER THAN FILAMENT SETTINGS FOR MYSELF. &nbsp;I made this due to I dont like having hatch on the box for lid lock.

0.2mm layer, 2 walls, 5% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

UPDATE:  What is better than a Teeny Storage box?  A Teeny Tiny Storage box.  I created a smaller version.  I added an Oreo cookie for scale.  What a perfect place to store some… ummmm.. AAA batteries?  a few coins?  A half eaten Oreo cookie  Hope you enjoy.  This is not just a scale down, but I went back to the original model and adjusted the sizes while keeping needed tolerances.  &nbsp;UPDATE 2: There is a new print profile that has a latching lid.  There is slight modifications to both the top and bottom.  Both will work with the original models, but only these together will latch.  This also introduces the square lid layout.  I know I have some with the diamond patterns and some with the square pattern, now my mini&#39;s can match.  &nbsp;<commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>Want to sell this model yourself, then join the membership.  Want modifications to this model or suggest other models for me to create, join the Premium tier.  </commercialcontent></commercialme>&nbsp;This is my rendition of the Lowes Teeny Tote, aka the Lowes Project Source mini tote.  This is a small stacking box that is modeled after the black and yellow storage bins sold at many stores.  The lid is designed to allow one box to stack on top of the next box.  This is a fun little print.  &nbsp;I have done the bottom and the top on separate plates so that you can do them different colors, to get the iconic black and yellow.  You can fit two lids or two bases or one of each on a single plate (except for the A1 mini).  &nbsp;I do not have the one that is sold at Lowes, so this is my best approximation based on what I could find.  The box is 4.8 inches wide, 3.3 inches deep, and 2.4 inches tall.  I have made a lid that goes with it that ends up being 4.9 inches wide and 3.45 inches deep making the overall height 2.46 inches.  &nbsp;

Teeny Tote (aka Lowes Mini Tote)

ASIA

Print Profile(8)

Description

Comment & Rating (790)

License

Related Models