Holy Grail Stock Pack
Print Profile(4)
Bill of Materials
.jpg)
Description
The Holy Grail Stock Pack is finally here!
Each pack has its own folder and bambu file/print profile. Refer to specific recommendations from creators of supported designs Direct Mounts. PLA+ is fine for the rest, TPU for the pad.
Rail Pack is directly from my DeACR design, as I basically redid the whole thing. It’s not compatible with any of the other packs at the moment.
Other Packs
Dissident
Scorpion
Holdup
Marsupial (In step files and completely unprinted & untested)
MP5 remix can be found here: https://makerworld.com/en/models/1967023-holy-grail-stock-mp5-remix#profileId-2114741
@TheRealUncleDan - Thank you for your contribution!!!
I went ahead and made some other pads and included them in the pack as well. 2 very basic TPU pads and a PLA pad, which you’ll have to glue on or something.
BOM
2x) M2.5 x 23mm (can be up to 30mm) - adj tabs
2x) springs - cut in 1/2 - or comparable sized… - adj tabs
https://www.amazon.com/dp/B093ZX5HXK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2
1x) M3 x 30mm w/ nut - cheek rest
1x) M5 x 40mm - RAIL Foldy part hinge
1x) M5 x 50mm - ALL OTHER PACKS Foldy part hinge
2x) M3 x 35mm(can be up to 45mm) - latch
1x) Ender 3 bed spring - latch (can fit a spring used for adjustment tabs in a pinch)
1x) M3 x 25mm w/ nut - Stock mount
2x M5x40mm w/ nuts - Rail mount
Previous versions (included in step file) use more nuts
M3 Hardware kit - https://www.amazon.com/dp/B0DHG9NMLZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
M3 Nuts - https://www.amazon.com/dp/B075ZZW7VL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1
M2.5 Hardware kit - https://www.amazon.com/dp/B07J58257F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
M5 Hardware kit - https://www.amazon.com/dp/B0DHLQ9RHJ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
Accreditations
Uberclay/PrintsandtheRev - Literally would have been dead in the water from breaking the model so huge shout out to him, love you long time!
AWCY & V8VTwin - for the original ref cad. Hope y’all like my hundreds of hours refining this thing.
Allthingsfirearms -Holdup testing & suggesting
3D2A Remixes - Scorpion files and helped out a bunch testing
Walker Gordon - Testing dissident build
DB Firearms - Holdup files
MPRTECH - Dissident files
CipherPrints2A - Marsupial files
Unseenkiller - “Really Strong Latch” design
3DArms - QD mount
Damascus_2a - original brace end file
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)