Killer Klowns from outer space
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.6x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#0206ed PLA 3DHOJOR BASIC BLUE BASIC Transmission Distance: 4.8
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#fffd07 PLA 3DHOJOR yellow Transmission Distance: 5.7
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BLUE BASIC
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Blue Gray
At layer #14 (1.2mm) swap to yellow
At layer #18 (1.52mm) swap to White for the rest.
Boost Me (for free)
if you like what you see send a boost! thanks!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)