Gridfinity - TenPoint Nemesis Broadhead Bins

This set includes two Gridfinity bins custom-made for the TenPoint Nemesis Broadhead.

1×1×10 — holds a single broadhead tip

1×3×10 — holds up to three tips side-by-side

Each bin fits the standard Gridfinity baseplate, making it easy to integrate into any existing Gridfinity storage system.

These bins feature a 5 mm colored lip designed for optional two-color printing. If you don’t want a dual-color print, simply remove the filament swap or set both project filaments options in the slicer to the same material — the model will print perfectly fine in one or duel color. I used PETG-HF, but PLA will work just fine as well.

For safety, the broadheads are inserted vertically with the blades positioned below the top edge of the bin, keeping the sharp edges recessed and protected when handling.

Features:

• Gridfinity-compatible: 1×1x10 and 1×3x10 bins
• Made for TenPoint Nemesis broadhead tips
• Optional 5 mm lip for color accent or single-color print
• Clean, support-free design
• All bins in one profile, one bin per plate

Note: The profile has been setup with the settings below, adjust for your use case. I turned the prime tower off due to the cost savings with no apparent visual difference, plus these are utility bins not art work.

Print Settings (Standard 0.20mm): 

• Material: PETG (for durability) or PLA (for general storage)
• Infill: 10% (gyroid) - Optional: Increase for more durability
• Wall loops: 2 - Optional: Increase for more durability
• Supports: Not needed
• Prime tower: Disabled

Gridfinity - TenPoint Collection

The TenPoint Collection

Gridfinity - TenPoint Nemesis Broadhead Bins

Gridfinity - TenPoint Alpha-Blaze Nock Bin

More coming soon!

As always, constructive feedback and boosts are always appreciated, thank you for the support!