PI 5 Module 2 or 3 & Night Vision Camera Stand V2

Raspberry PI 5 Module 2 or 3 & Waveshare MX219-160 IR-Cut Night Vision Camera Stand Version 2

I have designed a cool Camera Stand for the Raspberry PI Camera Module 2 or 3 camera boards and a combined Raspberry PI Camera Module 2 or 3 and Waveshare MX219-160 IR-Cut Night Vision camera boards using Fusion 360.

This is designed to be used as a table top, wall mounted or ceiling mounted stand as it allows for vertical (pan) and horizontal (tilt) rotation of the cameras.

If you wish to 3d print the Raspberry PI Camera Module 2 or 3 camera board stand, you need to 3d print the following parts:

• PI_Camera_Module_Stand_Base_Version_2.stl
• PI_Camera_Module_Stand_Holding_Bracket_Version_2.stl
• PI_Camera_Module_Stand_Vertical_Axis_Bracket_Version_2.stl
• PI_Camera_Module_2_or_3_Stand_Holding_Bracket_Version_2.stl

To assemble the Raspberry PI Camera Module 2 or 3 camera board stand, you will need the following components:

• PI Camera Module 2 or 3
• 4 x M3 Threaded Heat Inserts
• 4 x M3 Hex Head Bolts x 8mm Long
• 2 x M5 Hex Head Bolts x 16mm Long & Nuts
• 4 x M2 Hex Head Bolts x 8mm Long & Nuts

If you wish to 3d print the combined Raspberry PI Camera Module 2 or 3 and Waveshare MX219-160 IR-Cut Night Vision camera board stand, you need to 3d print the following parts:

• PI_Camera_Module_Stand_Base_Version_2.stl
• PI_Camera_Module_Stand_Holding_Bracket_Version_2.stl
• PI_Camera_Module_Stand_Vertical_Axis_Bracket_Version_2.stl
• PI_Camera_Module_2_or_3_and_Night_Vision_Camera_Stand_Holding_Bracket_Version_2.stl

To assemble the combined Raspberry PI Camera Module 2 or 3 and Waveshare MX219-160 IR-Cut Night Vision camera board stand, you will need the following components:

• PI Camera Module 2 or 3
• 4 x M3 Threaded Heat Inserts
• 4 x M3 Hex Head Bolts x 8mm Long
• 2 x M5 Hex Head Bolts x 16mm Long & Nuts
• 8 x M2 Hex Head Bolts x 8mm Long & Nuts

You are free to download the .stl files and print them for personal use but not for commercial use.

Please enjoy!