Card Scanner Catcher

This 3D printed card catcher is designed to attach directly beneath the Epson ES-400 and ES-400 II document scanners to safely collect trading cards or small-format media after scanning. It prevents cards from sliding off the work surface and keeps them aligned for easy retrieval.

Design Features

• Precise Fit: Designed specifically around the ES-400 and ES-400 II scanner footprint for stable placement.
• Card Compatibility: Fits standard 63 × 88 mm trading cards (Pokémon, Magic: The Gathering, sports cards, etc.), including sleeved or top-loaded cards.
• Open Front: Allows cards to stack neatly while remaining accessible without bending or damage.
• Low Friction Interior: Ensures smooth card movement and prevents surface wear.
• Compact Footprint: Fits under the scanner output path without interfering with feed rollers or sensors.
• Print-Friendly Geometry: No supports required; prints flat on the build plate.

Recommended Print Settings

• Orientation: Base flat on bed
• Layer Height: 0.2 mm
• Infill: 15–25%
• Material: PLA or PETG recommended
• Supports: None required
• Print Time: ~3–4 hours depending on printer and speed

Dimensions

• Overall: ~125 mm W × 95 mm D × 35 mm H
• Card compartment: fits standard trading cards up to 3 mm stack height (expandable if scaled in Z)

Notes

This design is optimized for Epson ES-400 and ES-400 II scanners but may also fit similar Epson document scanner models with the same output height and width. Designed for easy printing and durable daily use.